www.atcom.cn
9
Chapter 4 Software Configuration
1.
Please use cat /proc/interrupts command to check if the driver of AX4B is loaded or not, if the
AX4B driver is loaded correctly, you can get one line with wcb4xxp
20: 2310670 2218516 IO-APIC-fasteoi wcb4xxp
If you can not get the line above, but you can get one line with hfc4s8s_l1, then please use the
following command to delete the hfc4s8s_l1.ko module.
rm –rf /lib/modules/2.6.18-238.el5/kernel/drivers/isdn/hisax/hfc4s8s_l1.ko
After deleting hfc4s8s_l1.ko, please reboot your server.
2.
Please use the “dahdi_genconf” command to configure the /etc/dahdi/system.conf file and
generate /etc/asterisk/dahdi-channels.conf file.
[root@localhost ~]# dahdi_genconf
It does not show any output if dahdi_genconf run successfully.
After
running
dahdi_genconf
successfully,
the
/etc/dahdi/system.conf
and
/etc/asterisk/dahdi-channels.conf file will get the following configuration:
/etc/dahdi/system.conf:
