ARP table
Issue 1 January 2008
173
Related Commands
,
show ip arp
Use the
show ip arp
command to display the Address Resolution Protocol (ARP) cache.
Syntax
show ip arp [
interface
|
ip_interface
|
ip_addr
[
ip_mask
] | static]
Parameters
User Level
read-only
Context
general
Example
To display all ARP mappings:
G450-001(super)# show ip arp
To display one host ARP mapping:
G450-001(super)# show ip arp 192.168.49.1
To display a range of ARP mappings:
G450-001(super)# show ip arp 192.168.49.1 255.255.255.0
To display ARP mappings for the VLAN 1 interface:
G450-001(super)# show ip arp “Vlan 1”
Parameter
Description
Possible Values
Default
Value
interface
The interface name, in quotes
string (1-32 chars)
ip_interface
The IP interface name, in quotes
string (1-32 chars)
ip_addr
The IP address of the station(s)
ip_mask
The IP mask of the routes
static
Keyword that specifies to display
static IP ARP information
Summary of Contents for G450 Manager
