- 7 -
a. On the host computer, activate EndPoint:
b. Using Chariot Console on the reference computer, create two pair groups (192.168.1.100 and
192.168.1.110) using the Chariot Throughput.scr script. Run the throughput test for a specified period of time
and observe the results.
RF Tx/Rx Performance Test
CREATING A Tx TEST
(In Ubuntu linux 12.04)
1. Open the Terminal, enter the command: sudo su and password.
2. Enter
Insmod /(path of dhd.ko file)
firmware_path=/(path of firmware file) nvram_path=/(path of nvram file) to enable.
3. Enter the wl ver command to check the current WL driver version.
4. Run the following command set
(delay at least 700ms between each command)
:
11b rate:
./wl mpc 0
./wl phy_watchdog 0
./wl country ALL
./wl band b
./wl channel 1
./wl up
./wl phy_forcecal 1
./wl scansuppress 1
./wl txchain
1
./wl txcore -k 1 -o 1
./wl 2g_rate -r
1
-b 20
./wl phy_txpwrctrl 1
./wl txpwr1 -1
./wl txpwr1 -o -d
16
./wl pkteng_start 00:11:22:33:44:55 tx
100 1024
0
Summary of Contents for AW-CM195NF
Page 2: ...2...
Page 27: ...4 1 2 XXXyyyLPDzzzz x...
