S3-915M
User manual
25
OK
Precautions
Set how long the rx1 window will open after sending, and set before
sending data. It is the protocol default value when not set.
Command
character
Command
Type
Command Format
response
CSAVE
(
Save MAC
parameter
settings
)
Test
command
AT+CSAVE=?
+CSAVE
OK
Setting
command
AT+CSAVE
OK
Parameter
Description
<MType>: 0: unconfirm package, 1: confirm package.
<value>: is the maximum number of transmissions, ranging from 1 to 15;
Return value
description
Example
This command saves the configuration parameters to EERPOM/FLASH
After executing the AT+RESET command, the module will use the new
MAC configuration parameters for network initialization and operation.
Precautions
Need to save before sending data
Command
character
Command
Type
Command Format
response
CRESTOREMAC
(
Restore MAC
default
parameters
)
Test
command
AT+CRESTOREMAC=?
+CRESTOREMAC
OK
Setting
command
AT+CRESTOREMAC
OK
Parameter
Description
This command restores the MAC default configuration parameters to
EERPOM/FLASH.
Return value
description
Example
AT+CRESTOREMAC
OK
Precautions
Command
character
Command
Type
Command Format
response
IREBOOT
(
Restart module
)
Test
command
AT+IREBOOT=?
+IREBOOT:"Mode"
OK
Setting
command
AT+IREBOOT=<mode>
OK
Parameter
Description
<mode>: restart mode;
0: Restart the communication module immediately.
1: Wait for the radio frame currently being sent in the communication
module to complete and then restart.
Return value
description
Example
AT+IREBOOT=1
OK
