1.1. Hardware
• Chipsee Industrial Embedded Computer
• 6V ~ 36V Power Adapter (7”) / 15V ~ 36V Power Adapter(10” and other bigger
size)
• USB to serial cable or other serial debug cable
• TF Card( at least 4GB)
You need to prepare the Power Adapter by yourself. 7” products need a 6V ~
36V Power Adapter, 10” and other bigger size products need a 15V ~ 36V Power
Adapter. USB to serial cable is used to debug the Chipsee Industrial Embedded
Computer. The TF card is used to make bootable card and reflash the system.
1.2. Software
• Prebuilt Images Package
• Xshell or other terminal emulation software
• Cross-toolchain
• VNC-Viewer
You can use the Prebuilt Images Package to reflash the system. You can find
it in DVD/Debian8.10/Prebuilts directory. You can use Xshell to debug Chipsee
Industrial Embedded Computer in Windows. You can use VNC-Viewer to remote
control Chipsee Industrial Embedded over Ethernet. The cross-toolchain can
compile program for Chipsee Embedded Computer.
2. Debug
This document uses Xshell to debug Chipsee Industrial Embedded Computer, you
also can use other tools, like SecureCRT and Minicom.
