S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-329
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
transport email (Call Home)
transport email (Call Home)
To configure the Simple Mail Transport Protocol (SMTP) server address for the Call Home functionality
to work, and optionally the from and reply-to e-mail addresses, use the
transport email
command. To
remove the SMTP server, use the
no
form of this command.
transport email
{
from
email-addr
|
mail-server
ip-address
[
port
port-no
] [
priority
priority-no
] |
reply-to
email-addr
|
smtp-server
ip-address
[
port
port-no
] [
use-vrf
vrf-name
]}
no transport email
{
from
|
mail-server
ip-address
[
port
port-no
] [
priority
priority-no
] |
reply-to
|
smtp-server
}
Syntax Description
Command Default
SMTP port number: 25
SMTP server priority: 50
Command Modes
Callhome configuration mode
Command History
Examples
This example shows how to configure the SMTP server for the Call Home service:
switch#
configure terminal
switch(config)#
callhome
switch(config-callhome)#
transport email smtp-server 192.0.2.10 use-vrf Red
switch(config-callhome)#
from
Specifies the e-mail from field for Call Home messages.
email-addr
E-mail address. The address can be a maximum of 255 alphanumeric
characters and cannot include white spaces; for example,
personname
@
companyname
.
com
.
mail-server
Configures the SMTP server address for supporting multiple SMTP servers.
ip-address
Domain name server (DNS) name, IPv4 address, or IPv6 address of the
SMTP server.
port
port-no
(Optional) Specifies the SMTP server port. The port number range is from
1 to 65535, and the default port number is 25.
priority
priority-no
(Optional) Specifies the SMTP server priority. The server priority value
range is from 1 to 100, and the default is 50.
reply-to
Specifies the reply-to email address.
smtp-server
Configures the SMTP server address.
use-vrf
vrf-name
(Optional) Specifies the virtual routing and forwarding instance (VRF)
instance to use when communicating with this SMTP server. The name is
case sensitive and has 255 alphanumeric characters.
Release
Modification
5.0(3)U1(1)
This command was introduced.
