Integrated Switching Power Supply
8
Command
Function
Feedback Example
When x =1~5, clear the data of the
Group x.
Clear F[x].
QueryGroup[x].
When x = NULL, query all groups.
Out 01 02 03 04 05 06 07
08 09 10 11 12
Vm1 12 12 12 12 12 12 12
12 12 12 12 12
Vm2 XX XX XX XX XX XX
XX XX XX XX XX XX
……
When x = 1~5, query the group x.
Out 01 02 03 04 05 06 07
08 09 10 11 12
Vm[x] 12 12 12 12 12 12 12
12 12 12 12 12
%0911.
Restore Factory Defaults.
Factory Default
/*Name;
Query the manufacturer.
XXX
/*Type;
Query the product model
PSU12
/^Version;
Query the software version.
V x. x. x
Baud[x].
Set the baud rate as x. x = 1200,
2400,4800,9600,19200,38400,
57600,115200.
When x =NULL, the default baud
rate is 9600.
Baud [x] not change.
Baud [y] change to [x].
%0964.
Query the IP address.
IP XXXX
Note:
After sending the
“Output/[x]V/[y].”
to change the output voltage, the
corresponding output channel will be switch off, the command “
[x]@.”
should be sent
to switch on this output channel again.
