This command switches the command mode to ENCODER. Any video
commands apply to the encoder in this mode. Encoder #1 is the H264 encoder and #2 is
the MPEG-4 encoder. You may also use the command H264 in place of ENCODER 1
and MPEG4 in place of ENCODER 2.
DECODER
This command switches the command mode to the DECODER. Any video
commands apply to the decoder in this mode.
BITRATE
[n]
This command adjusts the bit rate (in kbits/sec) of the encoded H.264 video.
Default: The default is set by the Profile command
Example Command:
BITRATE 2000
(Sets max bit rate to 2 Mbits/sec)
Notes: This command should be issued AFTER the Profile command if the
Profile command is used.
FPS
[n]
Sets encoded frames/second. Where n = frames per second of the video stream
For NTSC: (i.e. 30, 15, 10, 7, 6, 5, 3, 2, 1)
For PAL: (i.e. 25, 12, 8, 6, 5, 3, 2, 1)
RES
<D1|CIF|QCIF>
Sets encoder resolution. Currently H264 only supports D1. The MPEG-4
encoder supports all listed resolutions.
QCIF - 176x120
CIF - 352x240
D1 - 720x480
BRIGHT
[n]
This command adjusts image brightness. The acceptable range is from 0 to 255,
where a higher number provides more brightness.
Default: 128
Example Command:
BRIGHT 170
(increases brightness from default setting)
CONTRAST
[n]
This command adjusts image contrast. The acceptable range is from 0 to 255,
where a higher number provides more contrast.
Default: 63
Example Command:
CONTRAST 90
(increases contrast from default)
SATURATION
[n]
Adjusts color saturation. The acceptable range is from 0 (no color) to 255.
29
Summary of Contents for VCX-7401
