UMN:CLI
User Manual
V5824G
44
3.3
Useful Tips
This section describes useful tips for operating the V5824G with a CLI.
•
•
•
•
Using Command of Privileged EXEC Enable Mode
•
3.3.1
Listing Available Command
To list available commands, input question mark <
?
> in the current mode. When you input
the question mark <
?
>, you can see available commands used in this mode and variables
following after the commands.
The following is the available commands on
Privileged EXEC Enable
mode of the
V5824G.
SWITCH#
?
Exec commands:
clear
Reset functions
clock
Manually set the system clock
configure
Enter configuration mode
copy
Copy from one file to another
debug
Debugging functions
default-os
Select default OS
disconnect
Disconnect user connection
enable
Turn on privileged mode command
erase
Erase saved configuration
exit
End current mode and down to previous mode
halt
Halt process
help
Description of the interactive help system
no
Negate a command or set its defaults
ping
Send echo messages
quote
Execute external command
rcommand
Management stacking node
release
Release the acquired address of the interface
(Omitted)
SWITCH#
Question mark <
?
> will not be shown in the screen and you do not need to press
<
ENTER
> key to display the command list.
If you need to find out the list of available commands of the current mode in detail, use
the following commands.
Command
Mode
Description
show list
All
Shows available commands of the current mode.
show cli
Shows available commands of the current mode with
tree structure.
i
