１３
4
Description of PS Commands
Ⅱ
. External Control Status: PS group
Detailed description of the status confirmation commands
11. Get player status confirmation request ( GetStatus ) ---- Valid when the power is on
<Format> [PS,GetStatus]<CR>
<Reply> [PS,GetStatus,Error code,Status code]
(For the error codes, refer to the list of error codes on page 6.)
<Details>
・
Sends a request for the DN-V310’s operating status.
・
In response to the request, the DN-V310 returns the error code corresponding to the
sent command and the status code indicating the DN-V310’s status.
・
During loading, the DN-V310 does not respond to the command, and the received command is
not valid. Send the command again after loading is completed or until there is a response.
List of status codes
Code
Name
Description
0
Error
Disc error or other problem has arisen
1
Opened
Tray is open
2
No Disc
Tray is closed by no disc is loaded
3
Stopped
Stop mode condition
4
Playing
Play mode condition
5
Pause
Still or pause mode condition
Example: To get the DN-V310’s operating status
[PS,GetStatus]<CR>
→
A request for the DN-V310’s operating status is sent from the controller.
[PS,GetStatus,0,4]
←
The sent message’s error code 0 (no error) and status code 4
(Playing) are returned from the DN-V310.
