ESP32LR88
User Manual v1.6
MW Sets the MQTT password (V1.6+)
This is for MQTT brokers that are setup to require a username and password.
MW “mySuperSecretPassword”
OK. Saved MQTT Password: mySuperSecretPassword
R1-R8
Sets the MQTT topic this relay is subscribed to
R3 "Workshop/Heater"
OK. Saved Relay 3 Topic: Workshop/Heater
In use, the payload for relay topics should be a string with the first character set to ‘0’ or ‘1’
(ASCII characters 0x31/0x30).
N1-N8
Sets the MQTT topic this Input will publish to
N2 "Workshop/Heater"
OK. Saved Input 2 Topic: Workshop/Heater
The payload generated for input topics is a string with the first character set to ‘1’ if the input is
open or unconnected, and ‘0’ if the input pins are shorted. (ASCII characters 0x31/0x30).
Copyright
© 2021,
Devantech Ltd.
All rights reserved.
8
