ESP32LR88
User Manual v1.6
AP Sets the ASCII password
AP "MySecretPassword"
OK. Saved AsciiPassword: MySecretPassword
MS Sets the MQTT broker address
MS “192.168.0.121”
OK. Saved MQTT Server: 192.168.0.121
MD Sets the MQTT ID for this module
MS “UniqueModuleName”
OK. Saved MQTT ID: UniqueModuleName
MP Sets the MQTT broker’s port
Normally, this should be set to 1883.
mp 1883
OK. Saved MQTT port number: 1883
If you are not using MQTT, set the port to 0. This will turn off MQTT, otherwise it will continuously
try to connect if there is no MQTT broker.
MU Sets the MQTT user name (V1.6+)
This is for MQTT brokers that are setup to require a username and password. For open MQTT
brokers that do not require a user name/password, these may be ignored.
MU “myUsername”
OK. Saved MQTT User: myUsername
Copyright
© 2021,
Devantech Ltd.
All rights reserved.
7
