Epsilon-12G2 User Manual Revision A.02
www.diamondsystems.com
Page 17
(config)# no radius-server attribute 4
(config)# no radius-server deadtime
(config)# no radius-server host <host_name> [ auth-port <auth_port> ] [ acct-port <acct_port> ]
(config)# no radius-server key
(config)# no radius-server retransmit
(config)# no radius-server timeout
# show radius-server [ statistics ]
# show running-config [ all-defaults ]
# show running-config feature <feature_name> [ all-defaults ]
# show running-config interface ( <port_type> [ <list> ] ) [ all-defaults ]
# show running-config interface vlan <list> [ all-defaults ]
# show running-config line { console | vty } <list> [ all-defaults ]
# show running-config vlan <list> [ all-defaults ]
7.1.20 Banner Commands (Defines a login banner)
(config)# banner [ motd ] <banner>
(config)# banner exec <banner>
(config)# banner login <banner>
(config)# no banner [ motd ]
(config)# no banner exec
(config)# no banner login
7.1.21 Terminal Commands
(# no terminal editing
# no terminal exec-timeout
# no terminal history size
# no terminal length
# no terminal width
# terminal editing
# terminal exec-timeout <min> [ <sec> ]
# terminal help
# terminal history size <history_size>
# terminal length <lines>
# terminal width <width>
7.1.22 Reload
# reload { { { cold | warm } [ sid <usid> ] } | { defaults [ keep-ip ] } }
7.1.23 Firmware Commands
# firmware swap
# firmware upgrade <tftpserver_path_file>
7.1.24 Ping Commands
# ping ip <v_ip_addr> [ repeat <count> ] [ size <size> ] [ interval <seconds> ]
7.1.25 Debug Commands
(config)# line { <0~16> | console 0 | vty <0~15> }
# no debug prompt
# debug prompt <debug_prompt>
7.1.26 Security Commands
(config)# no aaa authentication login {console | http}
