Using the Telnet/SSH/CLI Interface
Eaton Network Card-MS User’s Guide P-164000100—Rev 1
www.eaton.com/powerquality
55
General Commands
Use general commands to open, close, and control sessions (see Table 14).
Network Commands
Use network commands to administer network parameters and authorizations (see Table 15).
Table 14. General CLI Interface Commands
help or ?
Display help about a specific command.
Syntax
help [command] or [command] ?
Example
#> help getNetwork or #> getNetwork ?
setEcho
Hide, or not, all characters. If hidden, each character entered is replaced by an asterisk (*).
Syntax
setEcho [option]
Options
ON | OFF
Example
#> setEcho ON
quit
Close a current CLI session.
Syntax
quit
Example
#> quit
reset
Reset the software.
Syntax
reset
Example
#>
version
Get information about the sotware version.
Syntax
version
Example
#> version
defaultPass
Return to the default login and password.
Syntax
defaultPass
Example
#> defaultPass
defaultConf
Return to the default configuration.
Syntax
defaultConf
Example
#> defaultConf
Table 15. Network Commands
getNetwork
Read a network setting.
Syntax
getNetwork [option1] [option2] . . .
Options
DHCP | IPAddress | IPMask | IPGateway | HostName | DomainName | IPv6Enable | IPv6AutoConf |
IPv6Address1 | PrefixLength | IPv6DefaultGateway | IPv6LocalAddress | IPv6Address2 | PrimaryDNS |
SecondaryDNS | FirmwareUpgrade
Example
#> getNetwork IPAddress
