RAGNARÖK
Manual
Page 21
INI-File
RAGNARÖK
is able to read some settings from a configuration file (
ragnarok.ini
)
located in the same directory as the RAGNARÖK VST DLL (
ragnarok.dll
or
ragnarok64.dll
) or Mac VST/AU (
Ragnarok.component
or
Ragnarok.vst
) itself. After
you have edited this INI file in a text editor, you have to reload it using the
Reload
Configuration
command from the
File
).
NOTE: If you don't want automatic MIDI-CC mapping, for example when you want to
use the parameter learn function in your DAW, simply remove or comment-out all the
mappings in the INI-file.
MIDI Control Change Messages
All parameters of RAGNARÖK can be controlled by MIDI controllers, or more precise:
Each MIDI controller (except
Modulation Wheel
and
Sustain Pedal
) can control one of
RAGNARÖK’s parameters. The mapping is defined in the
ragnarok.ini
for example
like this:
[MIDI Control]
# General Purpose controllers
CC7 = 4 # Volume
CC74 = 28 # Filter Cutoff
...
The syntax is straight forward:
CC<
controller number
> = <
parameter ID
>
Given the above example, controller 7 directly controls the overall
Volume
parameter,
controller 74 the
Filter Cutoff
etc. As you can see, comments are introduced by the
Pound sign (#); they are here just for description purposes and completely optional.
The
parameter ID
of one of RAGNARÖK’s parameters is given in the section
below. Note that the
controller number
can run from 0 to 119, with the exception
of 1 (
Modulation Wheel
) and 64 (
Sustain Pedal
); the latter two are simply ignored.