209
binding-retry
Use
binding-retry
to specify the maximum number of attempts and the interval for sending MAC
binding queries to the MAC binding server.
Use
undo binding-retry
to restore the default.
Syntax
binding-retry
{
retries
|
interval
interval
} *
undo binding-retry
Default
The maximum number of query attempts is 3 and the query interval is 1 second.
Views
MAC binding server view
Predefined user roles
network-admin
Parameters
retries
: Specifies the maximum number of MAC binding query attempts, in the range of 1 to 10.
interval
interval
: Specifies the query interval in the range of 1 to 60 seconds.
Usage guidelines
If the device does not receive a response from the MAC binding server after the maximum number is
reached, the device determines that the MAC binding server is unreachable. The device performs
normal portal authentication for the user. The user needs to enter the username and password for
authentication.
If you execute this command multiple times in the same MAC binding server view, the most recent
configuration takes effect.
Examples
# Set the maximum number of MAC binding query attempts to 3 and the query interval to 60
seconds.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] binding-retry 3 interval 60
Related commands
display mac-trigger-server
captive-bypass enable
Use
captive-bypass enable
to enable the captive-bypass feature.
Use
undo captive-bypass enable
to disable the captive-bypass feature.
Syntax
captive-bypass
[
optimize
]
enable
undo
captive-bypass
[
optimize
]
enable
Default
The captive-bypass feature is disabled. The device automatically pushes the portal authentication
page to the iOS devices and some Android devices when they are connected to the network.
Summary of Contents for FlexNetwork MSR Series
Page 1005: ...987 ...
