Page | 64
11.5
Handicap Assistant Signal
Output:
Result byte
ACK
Task ID
'57'
‘46’
Function ID
‘50’
Length
0
Data
None
Note:
This command is used to respond with buzzer beeps for a key pressed, and it just responds when
connected with host. This command applies to following commands:
•
Get Encrypted PIN
•
Get Numeric with Display Message DisplayMessage and Get Numeric Key DisplayMessage and
Get Amount
•
Get Function Key
11.6
Display and Get Key (command only between CR-PINPAD)
Command:
Task ID
'25’
‘46’
Function ID
'B0’
Length
Length of data
Data
•
Display mode
1: Menu Display
2: Normal Display get function key
3: Display without key input
4: Normal Display get account number
5: Normal Display get numeric key
8: Language Menu Display
16: Clear Screen (Do Not Receive Input Data)
•
If Normal Display or Menu Display, Length of Total timeout for keypad entry.
•
If Normal Display or Menu Display, Total timeout for keypad entry, in second,
little endian, default is 30 seconds.
Note:
Total timeout will cancel keypad entry and return error.
•
If Normal Display or Menu Display, Length of minor timeout during each
keypad entry
•
If Normal Display or Menu Display, minor timeout during each keypad entry,
in second, little endian, default is 10 seconds.
Note:
Minor timeout will erase all previous keypad entry.
Summary of Contents for SmartPIN L100
Page 11: ...Page 11 5 3 1 L100 Dimensions ...