KeeLog SerialGhost DB-9 User Manual Download

Page: 27 / 33

SerialGhost Wi-Fi

WIFI.TXT

The file WIFI.TXT is responsible for configuring Wireless LAN and TCP/IP functionality. The
following tables summarize the available parameters.

Basic parameter list

Parameter

Values

Example

Description

WiFiNetwork

SSID string (no
default)

WiFiNetwork=MyWiFi

Access Point ID (SSID), case-
sensitive. If omitted, Wi-Fi
functionality will be disabled.

WiFiEncryption

None (default)
WEP64
WEP128
WPA
WPA2

WiFiEncryption=WPA2

Access Point encryption type. If
omitted, Wi-Fi functionality will
be disabled.

WiFiPassword

Password string
(no default)

WiFiPassword=MyPass

Access Point password, case
sensitive. If open network, skip
this parameter.

IpAddress

IP address string
(no default)

IpAddress=192.168.0.100

Static IP address of device. Skip
this parameter if using Auto-IP.

NetMask

Network mask
string (no default)

NetMask=255.255.255.0

Network mask of device. Skip
this parameter if using Auto-IP.

Gateway

Gateway address
string (no default)

Gateway=192.168.0.1

Default gateway. Skip this
parameter if using Auto-IP.

DnsServer

First DNS address
string (no default)

DnsServer=

216.231.41.2

First DNS. Skip this parameter if
using Auto-IP.

DnsServer2

Second DNS
address string (no
default)

DnsServer2=

206.124.64.1

Second DNS. Skip this
parameter if using Auto-IP.

Recipient

E-mail recipient
string (no default)

Recipient=john@server.com

Recipient E-mail address for E-
mail reporting. If omitted,
reporting will be disabled.

ReportInterval

Interval value (min.
600 sec. or 3600
sec., default 3600
sec.)

ReportInterval=7200

Interval for E-mail reporting in
seconds. Minimum interval is
600 seconds (10 minutes) for
custom SMTP server, and 3600
seconds (1 hour) for default
server.

ReportSize

Size value (max.
102400 bytes,
default 10240
bytes)

ReportSize=20000

E-mail report size in bytes.

DisableWiFi

Yes
No (default)

DisableWiFi=Yes

Wi-Fi disable flag.

Summary of Contents for SerialGhost DB-9

































Search results

Summary of Contents for SerialGhost DB-9

Reviews:

Related manuals for SerialGhost DB-9

Brands by name

Popular brands

KeeLog SerialGhost DB-9, User Manual

Search results

Summary of Contents for SerialGhost DB-9

Reviews:

Related manuals for SerialGhost DB-9

Brands by name

Popular brands