LT03
11
set.
Command format: HIDE, A#
Command description: Set the latency mode, A=1 On A=0 off
To set the upload interval in latent mode, it needs to send two commands: one: HIDE, 1# 2: HX, 30#
Command description: In latent mode, the terminal wakes up once every 30 minutes. The first
command on behalf of the terminal enable the latency mode, the next command is to set the upload
interval, the range is similar to wireless terminals: 10 ~ 43200min).
Set clock mode for the wired terminals while in latent mode:
Command Description: Set a multi-point upload parameter, maximum 4 time points T1...T4, you can set
one or more clocks if required, maximum supports 4 clocks.
Example: HIDE, 1# WAKEUP, 0800, 1200, 1600, 2000#;
They are all clock points, and the terminal will wake up at 8:00, 12:00, 16:00, and 20:00, and upload
the terminal parameter information.
Note: The latent mode function is optional, two commands need to be sent \\\ You need to send two
SMS commands separately to set them one by one. Please use them with caution!
HC,<T1>,<T2>,<T3>#
Set the upload interval in real time tracking mode:
T1：
upload interval in ignition on status, range,5-300s ,default 30s
T2：useless，write it as”0”
T3：
Sleep return interval, range 300-1800 s, default 600
For example
：HC,30,90,300#
Set the upload interval as 30s, 90 s in
ignition off and 300s while in sleep mode
（The tracker is without upload
when ignition off, write it as”0” for T2）
UTC,TTTT#
Set time zone
Range is 780~-720
For example
：UTC,480# Time zone UTC+8:00
VPN,apn,user,pswd#
Set APN, User name and password
For example
：VPN,APNAPDemo.com.attz,internet,internet#
APN:APNAPDemo.com.attz
Username: internet
Password: internet
VPN,APNAPDemo.com.attz # Set APN
GPS Talks
