page
11
Software
1>>IP address of server
2>>port number of server
3>>Access Point Name
Please contact to your network service
provider for more information.
4>>input an available name if need
5>>input a correct password if need
6>>identifier of device
Input a unique identifier as you need,
maximum 16 digits.
7>>input interval timer of GPRS, unit is
second.
8>>choose the mode of transmitting GPRS
There are two kinds of transmitting
method, TCP and UDP.
You can choose Disable to turn off GPRS
function.
1
2
3
4
5
6
7
8
SMS
Send SMS:
M000000,21,A
to set GPRS function.
A only can be 0 or 1 or 2
0 disable GPRS
1 enable GPRS, use TCP protocol
2 enable GPRS, use UDP protocol
Send SMS:
M000000,22,ID
to set the identifier of device.
ID maximum 16 digits
Send SMS:
M000000,23,APN,User Name,APN password
to set APN,User Name and APN password.
For example:
M000000,23,cmnet,,
APN is
“
cmnet
”
, User Name and APN password
is empty.
Send SMS:
M000000,24,IP,Port
to set the IP and Port of sever.
Note: the format of IP and Port should be right.
Send SMS:
M000000,25,Time
to set the GPRS upload time.
Time default value is 30, unit is second
0 disable GPRS upload
5 minimum value, upload GPRS every 5 seconds
…
65535 maximum value