Radiance 10/100 Mbps Services Line Card
62
set icmp
Description
: Set operational, processing mode for end-station ICMP
messages.
Syntax
:
set icmp <disable | enable | broadcastdisable>
Parameters
: disable – disables processing of all ICMP messages.
enable – enables processing of all ICMP messages.
broadcastdisable – enables processing of only unicast
ICMP messages, but disables processing of ICMP
messages sent to IP multicast, IP subnet broadcast,
and IP limited broadcast addresses.
Example
:
Console> set icmp broadcastdisable
status: Broadcast Disabled
Console>
set ip
Description
: Set the device’s IP address, network mask, or default
gateway IP address.
Note: If you change the network portion of the IP address,
the default gateway must also be updated to ensure
compatibility. If the gateway cannot be reached with
the new IP address, it will not be accepted.
Syntax
:
set ip <IP address> [mask <mask value>] [gateway
<default gateway IP address>]
Parameters
: IP address – end-station IP address in dotted decimal
notation.
mask value – the end-station prefix, or network mask in
dotted decimal notation or in /bits format.
default gateway IP address – default gateway IP address
in dotted decimal notation.
Example
:
Console> set ip 192.168.1.100 mask 255.255.255.0
Console>
set
l2controlprotocol
Description
: Set disposition for a Layer 2 control protocol on a port.
Syntax
:
set l2controlprotocol <stp | rstp | mstp | lacp | marker |
802.1X| bridge | garp | gvrp | gmrp> disposition <discard |
forward | peer> port <port number>
Parameters
: 802.1X – IEEE 802.1X Port Authentication Protocol.
bridge – LAN Bridge Management Protocol.
garp – IEEE 802 Group Attribute Registration Protocol.
gmrp – IEEE 802 GARP Multicast Registration Protocol.
gvrp – IEEE 802 GARP VLAN Registration Protocol.
lacp – IEEE 802.3ad Link Aggregation Protocol.
marker – IEEE 802.3ad Marker Protocol.
mstp – IEEE 802.1 Multiple Spanning Tree Protocol.
rstp – IEEE 802.1 Rapid Spanning Tree Protocol.
stp – IEEE 802.1 Spanning Tree Protocol, including Rapid
and Multiple Spanning Tree Protocols.
