GETTING STARTED WITH MLINUX MODELS
12
MultiConnect
®
Conduit
TM
Base Station IP67 Getting Started Guide for Versions 1.5 and 2.1
Configuring the LoRa Packet Forwarder
1.
Log in to the console, if you are not logged in.
2.
Establish an Internet connection via Ethernet or cellular.
3.
Edit the packet forwarder configuration as necessary by modifying
/opt/lora/global_conf.json
(version
2.1) or
/opt/lora/local_conf.json
(version 1.5) with vi or nano.
gateway_conf["server_address"]
Set your LoRa network server address
gateway_conf["serv_port_up"]
Set the up port used by your LoRa network server
gateway_conf["serv_port_down"]
Set the down port used by your LoRa network server
4.
Start the packet forwarder:
$ /etc/init.d/lora-packet-forwarder start
Additional LoRa and mLinux Information
For additional information, including how to configure LoRa devices to communicate with the MTCDTIP, visit
http://www.multitech.net
.
For help using LoRa, go to:
http://www.multitech.net/developer/software/lora/
For help using mLinux, go to:
http://www.multitech.net/developer/software/mlinux/
.
For additional information regarding configuration, go
to:
http://www.multitech.net/developer/software/lora/getting-started-with-lora-conduit-mlinux/
For additional packet forwarder information, go to:
http://www.multitech.net/developer/software/lora/conduit-mlinux-convert-to-basic-packet-forwarder/