A3LA-RG Guide Version B
Document Number: 451-93156-009B
60 of 180
TP data unit in octets; <pdu> is the GSM 04.11 [8] SC address followed by GSM 03.40
[9] TPDU in hexadecimal format. By default, message status will be set to ’stored
unsent’, but parameter <stat> allows also other status values to be given.
PDU entry must be terminated by <ctrl-Z>. Storing can be cancelled by sending the
<ESC> character.
Response is in the following format for PDU mode:
+CMGW: <index>
where <index> indicates the memory location where the message is stored.
If storing fails, final result code +CMS ERROR: <cms_err> is returned.
B.41 +CMOD
–
C
ALL
M
ODE
Set Command:
+CMOD=[<mode>]
Set command selects the call mode of further dialing commands (D) or for next
answering command (A). Mode can be either single or alternating (the terms
"alternating mode" and "alternating call" refer to all GSM bearer and tele-services
that incorporate more than one basic service (voice, data, fax) within one call). For
the satellite modem, only a single call is supported.
<mode>:
0
single mode (default)
Read Command:
+CMOD?
Query the current call mode settings. The response is in the form:
+CMOD: <mode>
Test Command:
+CMOD=?
List the supported call modes. The response is in the form:
+CMOD: (supported <mode>s)
B.42 +CNMI
–
N
EW
SMS
M
ESSAGE
I
NDICATIONS TO
DTE
Set Command:
+CNMI=[<mode>[,<mt>[,<bm>[,<ds>[, <bfr>]]]]]
