22
(continued)
"Keypad Programming" Function 67
;
6
7
;
[ _ _ ]
:
(Feature
Number)
67. Program System Features
Use Function 67 to program
one or more
system features. For example, program
;
6
7
;
2
5
:
to disable the sounder.
Before you implement any of the following Function 67 system features, take note that some features are ena-
bled ("ON") by default (for example, see #39, below). If you wish to turn a Function 67 system feature
off
that is
either enabled "ON" by default or was enabled manually, we strongly recommend that you first be aware of all
other Function 67 system features that may have already been programmed, because the ability to "toggle" a
single Function 67 system feature "ON" or "OFF" is not supported. First, all features must be turned "OFF" by
performing a special Function 67 command called "
Set All Function 67 Features to OFF
", i.e.
;
67
;
0
0
0
:
, then simply re-enable all of your previously programmed system fea-
tures.
Be aware of another, similar, special Function called "
Default All System Features
" (Function 68, i.e.
;
68
;
0
0
0
:
). When a manually enabled Function 67 system feature is no longer
desired, use this Function 68 command to restore all defaults, resulting in some being set to "OFF", and some
"ON" (depending upon their respective default states).
Note:
Since the use of the Function 67 "
Set All Function
67 Features to OFF
" or the Function 68 "
Default All System Features
" commands may require restoring
previously implemented system features, it is recommend to complete the "
Keypad Programming Record Sheet
"
on page 26 in order to keep track of your settings.
4
System Options
24.
One Time Entry for Group 3 Users.
When programmed, a Group 3 User is allowed entry only once, then be-
comes disabled.
Note:
When the credential is entered for the first time and access is granted, the Event Log will
show "Entry" followed by "User Disabled". If the User Code is entered a second time, access will be denied, and the
Event Log will show "User Denied Access".
Note:
To assign the selected User Codes to Group 3, see Function 35 on
page 17.
25.
Disable Sounder.
All audible feedback is disabled (except when in Program Mode and when
Enable Sounder
on Emergency
[Function 67, option 43] is enabled). For a summary of lock activities that trigger the sounder,
see "
LED and Sounder Indicators
" on page 40.
Remote Input Features
For more information about using the Remote Input, see page 21 (Function 64 and Function 65).
29.
Toggle Passage Mode.
Wireless Remote Release toggles Passage Mode. See page 36 to pair a Wireless Re-
mote Release to your lock.
Note:
This Wireless Remote Release setting; "Toggle Passage Mode" and the Function
67, feature 58 setting named "
Enable Toggle Mode (Manual Relock)
" that is described on page 24 are two independ-
ent settings. The Remote Release operation is not affected by the Function 67, feature 58 setting.
36.
Cancel Passage on Button Press.
Used with feature 58 ("
Toggle Locked / Unlocked
" , see below), if enabled,
when the state of the lock is in Passage (i.e. "unlocked"), one press and release of the "
Program / Passage
" button on
the Networx Control Unit will change the state of the lock to "locked" (Passage is cancelled).
Emergency Command Options
Local
Emergency Command Options (45 and 47, described below) are enabled ("ON") by default.
Global
Emergency
Command Options (38, 46 and 48, described below) can be enabled below or by a subsequent DL-Windows download.
Note:
For more information about " Global" vs. " Local" Emergency Commands, see page 31.
