NXP Semiconductors
AN10815
SWIM: NXP's basic graphics library for LPC products
4.2.4 Usage
1. Start Rowley CrossStudio for ARM and open the example solution file.
Select File->Open Solution
Open the following solution: EAC2478_SWIM_Example.hzp
2. Build the solution.
Build->Build Solution
3. Attach your CrossConnect debugger to the EA-2478 board and PC, then connect to
it.
Targets->Connect USB CrossConnect for ARM
4. Download the program into flash.
Debug->Start Debugging (F5)
5. Run the program!
Debug->Go (F5)
4.3 IAR EWARM project description
4.3.1 Description
Draws color bars on the LCD using the SWIM library with LCD in RGB1:5:5:5 mode.
4.3.2 Required hardware
EA-2478 Evaluation board w/Truly LCD module
4.3.3 Required software
IAR Embedded Workbench for ARM (EWARM) v5.x or newer
4.3.4 Usage
1. Start IAR Embedded Workbench for ARM and open the example workspace space.
File->Open->Workspace...
Open the following workspace: ea2478_swim_example.eww
2. Build the project
Project->Rebuild All
3. Attach JLink JTAG unit to the EA-2478 board and PC
4. Download the program into flash
Project->Download and Debug (Ctrl+D)
5. Run the program!
Debug->Go (F5)
4.4 Keil MDK project description
4.4.1 Description
Draws color bars and text on the LCD using the SWIM library with LCD in RGB1:5:5:5
mode.
AN10815
© NXP B.V. 2011. All rights reserved.
Application note
Rev. 3 — 15 June 2011
9 of 20
