No.17S138-00
52/58
STC-MBS881U3V / STC-MCS881U3V / STC-MBS122BU3V / STC-MCS122BU3V
Product Specifications and Use’s Guide
Name
Description
DeviceCharacterSet
Character set used by the strings of the device`s bootstrap registers.
DeviceReset
Resets the device to its power up state.
DeviceRegistersStreamingStart
Prepare the device for registers streaming without checking for consistency.
DeviceRegistersStreamingEnd
Announce the end of registers streaming. This will do a register set validation for
consistency and activate it.
DeviceTemperatureSelector
Selects the location within the device, where the temperature will be measured.
DeviceTemperature
Device temperature in degrees Celsius (C). It is measured at the location selected by
DeviceTemperatureSelector.
TimestampLatch
Latches the current timestamp counter into TimestampLatchValue.
TimestampLatchValue
Returns the latched value of the timestamp counter.
Name
Description
SensorWidth
Effective width of the sensor in pixels.
SensorHeight
Effective height of the sensor in pixels.
SensorShutterMode
Sets the shutter mode of the device.
WidthMax
Maximum width of the image (in pixels). The dimension is calculated after horizontal
binning, decimation or any other function changing the horizontal dimension of the
image.
HeightMax
Maximum height of the image (in pixels). This dimension is calculated after vertical
binning, decimation or any other function changing the vertical dimension of the image
DecimationHorizontal
Horizontal sub-sampling of the image. This reduces the horizontal resolution (width) of
the image by the specified horizontal decimation factor.
DecimationVertical
Vertical sub-sampling of the image. This reduces the vertical resolution (height) of the
image by the specified vertical decimation factor.
RegionSelector
Selects the Region of interest to control. The RegionSelector feature allows devices that
are able to extract multiple regions out of an image, to configure the features of those
individual regions independently.
RegionMode
Controls if the selected Region of interest is active and streaming.
ImageComponentSelector
Selects a component to activate data streaming from.
ImageComponentEnable
Controls if the selected component streaming is active.
Width
Width of the image provided by the device (in pixels).
Height
Height of the image provided by the device (in pixels).
OffsetX
Horizontal offset from the origin to the region of interest (in pixels).
OffsetY
Vertical offset from the origin to the region of interest (in pixels).
PixelFormat
Format of the pixels provided by the device. It represents all the information provided by
PixelCoding, PixelSize, PixelColorFilter combined in a single feature.
PixelFormatInfoSelector
Select the pixel format for which the information will be returned.
PixelFormatInfoID
Returns the value used by the streaming channels to identify the selected pixel format.
PixelSize
Total size in bits of a pixel of the image.
PixelColorFilter
Type of color filter that is applied to the image.
ReverseX
This feature is used to flip horizontally the image sent by the device. The AOI is applied
after the flipping.
ReverseY
This feature is used to flip vertically the image sent by the device. The AOI is applied
after the flipping.
MultiROIsInMultiPayloads
MultiROIs In MultiPayloads.
