IES-3082GC User Manual
ORing Industrial Networking Corp.
84
security telnet
G
Enable IP security of telnet server switch(config)#security
telnet
security ip
[Index(1..10)] [IP
Address]
G
Set the IP security list
switch(config)#security ip 1
192.168.1.55
show security
P
Show the information of IP security switch#show security
no security
G
Disable IP security function
switch(config)#no security
no security http
G
Disable IP security of HTTP server switch(config)#no security
http
no security telnet
G
Disable IP security of telnet server switch(config)#no security
telnet
6.3 Command Set List—Port Command Set
Commands
Level Description
Example
interface
fastEthernet
[Portid]
G
Choose the port for modification.
switch(config)#interface
fastEthernet 2
duplex
[full | half]
I
Use the duplex configuration
command to specify the duplex
mode of operation for Fast
Ethernet.
switch(config)#interface
fastEthernet 2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I
Use the speed configuration
command to specify the speed
mode of operation for Fast
Ethernet., the speed can’t be set to
1000 if the port isn’t a giga port..
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100
flowcontrol mode
[Symmetric|Asymm
etric]
I
Use the flowcontrol configuration
command on Ethernet ports to
control traffic rates during
congestion.
switch(config)#interface
fastEthernet 2
switch(config-if)#flowcontrol
mode Asymmetric
no flowcontrol
I
Disable flow control of interface
switch(config-if)#no
flowcontrol
security enable
I
Enable security of interface
switch(config)#interface
fastEthernet 2
switch(config-if)#security
