9
To add a card user (Method 2)
This is the alternative way to enter cards using User ID
Allocation. In this method a User ID is allocated to a
card. Only one user ID can be allocated to a single card.
1 ID number # Read card #
User can be added continuously without exiting programming mode
To add a card user (Method 3)
Card number is the last 8 digits printed on the back of the
card, user ID number auto generation.
1 Card number #
User can be added continuously without exiting programming mode
To add a card user (Method 4)
In this method a User ID is allocated to a card number.
Only one user ID can be allocated to the card number.
1
ID number. # Card number. #
User can be added continuously without exiting programming mode
To delete a card user by card. Note users can be deleted
continuously without exiting programming mode.
2 Read Card #
To delete a card user by user ID. This option can be used
when a user has lost their card
2 User ID #
To delete a card user by card number.
This option can be used when the user wants to make
the change, but the card has been lost.
2 Card number #
Note users can be deleted continuously without exiting programming mode
To add a card and PIN user in card and PIN mode (3 1 # )
To Add a card and Pin user
(The PIN is any four digits between 0000 & 9999 with
the exception of 1234 which is reserved.)
Add the card as for a card user
Press * to exit from the programming mode
Then allocate the card a PIN as follows:
* Read card 1234 # PIN # PIN #
To change a PIN in card and PIN mode (Method 1) Note
that this is done outside programming mode so the user
can undertake this themselves
* Read Card Old PIN # New PIN # New PIN #
To change a PIN in card and PIN mode (Method 2) Note
that this is done outside programming mode so the user
can undertake this themselves
* ID number # Old PIN # New PIN # New PIN #
To delete a Card and PIN user just delete the card
2 User ID #
To add a card user in card mode (3 0 # )
To Add and delete a card user
The operating is the same as adding and deleting a card user in 3 2 #
To delete All users
To delete All users. Note that this is a irreversible option
so use with care.
2 0000 #
To unlock the door
For a PIN user
Enter the PIN then press #
For a card User
Read card
For a card and PIN user
Read card then enter PIN #
DOOR OPEN - SETTINGS
Relay output delay time
To set door relay strike time
* Master code # 4 0
～
99 # *
0-99 is to set the door relay time 0-99 seconds
