90
7.13 Symbol Printing Check
Term
Command
Description (*)=Default
Printing check
output
PQTX=a,b
Set the printing check output
a=
1: Output the printing check to RS-232C
0: Do not output the printing check to RS-232C
(*)
b=
1: Output the printing check to LAN
0: Do not output the printing check to LAN
(*)
†
A=B if b is omitted.
Items of 2-D
Codes check
output
PQTYPE2D=a
Set the tems of 2-D Codes check output
a=
1: Output the overall quality for 2-D codes ISO
(*)
2: Output the overall quality for 2-D codes AIM
3: Output all the detailed quality for the 2-D codes ISO
4: Output all the detailed quality for the 2-D codes AIM
Select an
element of
comprehensive
quality
confirmation
item for 2-D
codes
PQITEM2D=a,b,c,
･
･･
Set the item of comprehensive qualityfor symbols
a,b,c...
: describes all the required items in CSV. It is output as 0
and ignores the other items if it contains 0.
0: Comprehensive judgment (The value of the item of the lowest
grade in 1 to 7)
(*)
1: Contrast (ISO) / Cell contrast (AIM)
2: Modulation (ISO) / Cell modulation (AIM)
3: Fixed pattern defect
4: Decode
5: Non-uniformity of axis
6: Non-uniformity of grids
7: Unused error correction
Outputs OK
(GOOUT) or
NG (NGOUT)
depending on
the checking
result
PQOKTH=a
Outputs OK (GOOUT) or NG (NGOUT) depending on the result of
Symbol Printing Check.
a:
0
(*)
, 1, 2,
3, 4
Threshould value to determine if the comprehensive judgement is
OK (GOOUT) or NG (NGOUT).
If the value is 0, the judgement is
not performed.
Setting value is more than a
OK
Less than a
NG
†
This is available only when the setting value of the item PQTX is
PTQX = 1 ,? or PTQX = ?, 1
Symbol printing check is an optional function. (Only for -V type)
