LPWA Module Series
BG95&BG77&BG600L Series TCP/IP Application Note
BG95&BG77&BG600L_Series_TCP/IP_Application_Note 31 / 56
Parameter
2.3.15. AT+QICFG Configure Optional Parameters
This command configures optional parameters.
.
AT+QIDNSGIP Get IP Address by Domain Name
Test Command
AT+QIDNSGIP=?
Response
+QIDNSGIP: (
range of supported
<contextID>
s
),<host_name>
OK
Write Command
AT+QIDNSGIP=<contextID>,<ho
st_name>
Response
OK
+QIURC: "dnsgip",<result>,<IP_count>
,
<DNS_ttl>
[.....
+QIURC: "dnsgip",<host_IP_addr>]
If there is any error:
ERROR
Maximum Response Time
60 s, determined by the network.
Characteristics
/
<contextID>
Integer type. Context ID. Range: 1
–16.
<host_name>
String type. Domain name.
<result>
Integer type. Result code of the operation. See
Chapter 4
for details.
<IP_count>
Integer type. Number of the IP addresses corresponding to the
<host_name>
.
<DNS_ttl>
Integer type. Time to live of the DNS.
<host_IP_addr>
String type. IP address of
<host_name>
.
AT+QICFG Configure Optional Parameters
Test Command
AT+QICFG=?
Response
+QICFG: "transpktsize",(
range of supported
<transpkt_size>
s
)
+QICFG: "transwaittm",(
range of supported
<transwaittm>
s
)
+QICFG: "dataformat",(
list of supported
<send_data_format>
s
),(
list of supported
<recv_data_format>
s
)
+QICFG: "viewmode",(
list of supported
<view_mode>
s
)
+QICFG: "recvind",(
list of supported
<recv_ind>
s
)
+QICFG: "sack",(
list of supported
<SACK>
s
)
+QICFG: "tcp/keepalive",(
list of supported
<keepalive>
s
),(
range
of
supported
<idle_time>
s
),(
range
of
supported
