GL100 @Track Air Interface Protocol
4.9. Power Management
4.9.1. Power Low Alarm
When the battery level of the terminal is low, it will report a power low alarm to the backend
server.
Example:
+RESP:
GTPLA
,357344020001500,20080111223344,000a,0102100203
4.9.2. Charge Status Report.
When the charge status of the terminal status is changed, it will report a message to the backend
server.
Example1:
When the terminal switches from normal mode to charge mode, it will report a
+RESP:GTBTC
message to the backend server as following:
+RESP:
GTBTC
,001000000000000,20030101120615,000a,0102100203
Example2:
When the charge is completed, the terminal will send a
+RESP:GTSTC
message to the backend
server as following:
+RESP:
GTSTC
,001000000000000,20030101120615,000b,0102100203
4.9.3. Full Power Up When Charge
Configure the “Full Power Up when Charge” function to the terminal using the parameter <
full
power up
> of the command
AT+GTSFR
.
If the function is enabled, the terminal will be fully powered up when the charger is inserted.
(Include GSM protocol stack and RF). Otherwise it will only go to charge mode in which the RF
function will be disabled.
Example:
If the backend server wants to enable the function, it can send the following command to the
terminal:
AT+GTSFR=gl100,1,1,1,0,0,0,0,5,
1
,20080102112233
“
1
” means to enable “Full Power up When Charge” function.
TRACGL100AN002
- 43 -
Quectel
Confidential
