33
10.2 Easy PLU Programming
The easy programming of PLU’s is done in manager mode (M) only. To program a PLU enter the
code number of the data field you want to change and confirm with the “Subtotal” key. The
following codes are available:
1
Sales Price
2
Cost Price
3
Description
4
Description 2
5
Department Link
6
Add Stock
7
Subtract Stock
8
Minimum Stock
After selecting a data field, enter the new value, confirm it by pressing “Subtotal” again, and
choose a PLU to be programmed. This can be done either by pressing a direct PLU key or by
entering the number on the “PLU” key. If you want to continue programming articles, you may
repeat the same steps. To finish the programming mode press the key “Subtotal” without entry.
Flowchart:
Example: Change price of PLU 5 to 2.00 EUR:
Example: Change description of PLU 5 to ABC:
Example: Add 10 pieces to stock of PLU 5:
5
C
B
A
Sub
total
Sub
total
3
5
0
Sub
total
Sub
total
1
6
Sub
total
RECORD
#
VALUE
M
PLU
Sub
total
Sub
total
CODE
#
PLU
5
00
Sub
total
Sub
total
2
1
