Red Hat NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT Reference Manual Download

Page: 264 / 300

The Network Services::FTP probe uses network sockets to test FTP port availability. It collects

the following metric:

• Remote Service Latency — The time it takes in seconds for the FTP server to answer a

connection request.

This probe supports authentication. Provide a username and password in the appropriate fields

to use this feature.The optional Expect value is the string to be matched against after a

successful connection is made to the FTP server. If the expected string is not found, the probe

returns a CRITICAL state.

Field

Value

Expect

FTP

Username

Password

FTP Port*

Timeout*

Critical Maximum Remote Service Latency

Warning Maximum Remote Service Latency

Table C.38. Network Services::FTP settings

8.3. Network Services::IMAP Mail

The Network Services::IMAP Mail probe determines if it can connect to the IMAP 4 service on

the system. Specifying an optional port will override the default port 143. It collects the following

metric:

• Remote Service Latency — The time it takes in seconds for the IMAP server to answer a

connection request.

The required Expect value is the string to be matched against after a successful connection is

made to the IMAP server. If the expected string is not found, the probe returns a CRITICAL

state.

Field

Value

IMAP Port*

143

Expect*

Timeout*

Critical Maximum Remote Service Latency

Appendix C. Probes

250

Summary of Contents for NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT













































































































































































































































































































Search results

Summary of Contents for NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT

Reviews:

Related manuals for NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT

Brands by name

Popular brands

Red Hat NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT, Reference Manual

Search results

Summary of Contents for NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT

Reviews:

Related manuals for NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT

Brands by name

Popular brands