RIGOL
Command Systems
Programming Guide for DS1000E, DS1000D Series
2-12
Command Format:
:DISPlay:PERSist
{ON|OFF}
:DISPlay:PERSist?
Function Explanation:
The commands set and query the state of the waveform persist. “ON” denotes
the record points hold until disable the presist, “OFF” denotes the record point
varies in high refresh rate.
Returned Format:
The query returns ON or OFF.
Example:
:DISP:PERS
ON Enable the waveform persist.
:DISP:PERS?
The query returns ON.
4.
:DISPlay:MNUDisplay
Command Format:
:DISPlay:MNUDisplay
<time>
:DISPlay:MNUDisplay?
Function Explanation:
The commands set and query the time for hiding menus automatically. <time>
could be 1s, 2s, 5s, 10s, 20s or Infinite.
Returned Format:
The query returns 1s, 2s, 5s, 10s, 20s or Infinite.
Example:
:DISP:MNUD
10
Setup the display time of menu as 10s.
:DISP:MNUD?
The query returns 10s.
5.
:DISPlay:MNUStatus
Command Format:
:DISPlay:MNUStatus
{ON|OFF}
