background image

Rev. 0.3 2/08

Copyright © 2008 by Silicon Laboratories

C8051F530A-DK

C8051F530A-DK

C8051F530A D

EVELOPMENT

 K

IT

 U

SER

S

 G

UIDE

1.  Relevant Devices

The C8051F530A Development Kit is intended as a development platform for the microcontrollers in the
C8051F52xA-53xA MCU family. The members of this MCU family are C8051F520A, C8051F521A, C8051F523A,
C8051F524A, C8051F526A, C8051F527A, C8051F530A, C8051F531A, C8051F533A, C8051F534A,
C8051F536A, and C8051F537A.

Notes:

„

The target board included in this kit is provided with two pre-soldered C8051F530A-IT MCUs (TSSOP-20 

package).

„

Code developed on the C8051F530A can be easily ported to the other members of this MCU family.

„

Refer to the C8051F52x/52xA/53x/53xA data sheet for the differences between the members of this MCU 

family.

2.  Kit Contents

The C8051F530A Development Kit contains the following items:

• C8051F530A Target Board
• C8051Fxxx Development Kit Quick-Start Guide
• Silicon Laboratories IDE and Product Information CD-ROM. CD content includes:

• Silicon Laboratories Integrated Development Environment (IDE)
• Keil 8051 Development Tools (macro assembler, linker, evaluation C compiler)
• Source code examples and register definition files
• Documentation
• C8051F52xA-53xA Development Kit User’s Guide (this document)

• Optional Third Party Tools CD
• AC to DC Power Adapter
• USB Debug Adapter (USB to Debug Interface)
• USB Cable

The development kit target board contains two C8051530A microcontrollers that can communicate through a LIN
network. One of the C8051F530A (U2) can also be connected to a CP2102 USB to UART bridge and directly
connected to two analog signals and a Voltage Reference Signal Input.
The kit includes one USB Debug Adapter. Additionally, a second USB Debug Adapter and a second instance of the
Silicon Labs IDE can be used to communicate with both microcontrollers on the board at the same time using only
one PC.

Summary of Contents for C8051F530A



















Reviews: