C 8 0 5 1 F 8 0 0 - D K
4
Rev. 0.2
5.1.2. Getting Started With the Silicon Labs IDE
The following sections discuss how to open an example project in the IDE, build the source code, and download it
to the target device.
5.1.2.1. Running the F800_Blinky example program
The
F800_Blinky
example program blinks an LED on the target board.
1. Open the Silicon Labs IDE from the Start menu.
2. Select
Project
Open Project
to open an existing project.
3. Browse to the
C:\SiLabs\MCU\Examples\C8051F80x_83x\Blinky
directory (default) and select the
F800_Blinky_C.wsp project file and click
Open
.
4. Once the project is open, build the project by clicking on the
Build/Make Project
button in the toolbar or
selecting
Project
Build/Make Project
from the menu.
Note:
After the project has been built the first time, the
Build/Make Project
command will only build the files
that have been changed since the previous build. To rebuild all files and project dependencies, click on the
Rebuild All
button in the toolbar or select
Project
Rebuild All
from the menu.
5. Before connecting to the target device, several connection options may need to be set. Open the
Connection
Options
window by selecting
Options
Connection Options...
in the IDE menu. First, select the “USB Debug
Adapter” option. Next, the correct “Debug Interface” must be selected. C8051F80x-83x devices use Silicon
Labs “
C2
” 2-wire debug interface. Once all the selections are made, click the
OK
button to close the window.
6. Click the
Connect
button in the toolbar or select
Debug
Connect
from the menu to connect to the device.
7. Download the project to the target by clicking the
Download
Code
button in the toolbar.
Note:
To enable automatic downloading if the program build is successful select
Enable automatic connect/
download after build
in the
Project
Target Build Configuration
dialog. If errors occur during the build
process, the IDE will not attempt the download.
8. Click on the
Go
button (green circle) in the toolbar or by selecting
Debug
Go
from the menu to start running
the firmware. The LED on the target board will start blinking.
5.1.2.2. Creating a New Project
Use the following steps to create a new projects. Once steps 1–5 in this section are complete, continue at Step 3 in
Section 5.1.2.1.
1. Select
Project
New Project
to open a new project and reset all configuration settings to default.
2. Select
File
New File
to open an editor window. Create your source file(s) and save the file(s) with a
recognized extension, such as .c, .h, or .asm, to enable color syntax highlighting.
3. Right-click on “New Project” in the
Project Window
. Select
Add files to project
. Select files in the file browser
and click Open. Continue adding files until all project files have been added.
4. For each of the files in the
Project
Window
that you want assembled, compiled and linked into the target build,
right-click on the file name and select
Add file to build
. Each file will be assembled or compiled as appropriate
(based on file extension) and linked into the build of the absolute object file.
Note:
If a project contains a large number of files, the “Group” feature of the IDE can be used to organize.
Right-click on “New Project” in the
Project Window
. Select
Add Groups to project
. Add pre-defined groups or
add customized groups. Right-click on the group name and choose
Add file to group
. Select files to be added.
Continue adding files until all project files have been added.
5. Save the project when finished with the debug session to preserve the current target build configuration, editor
settings and the location of all open debug views. To save the project, select
Project
Save Project As...
from
the menu. Create a new name for the project and click on
Save
.
