2
CONTENTS
Parameter name
Default value
Description
vstreamer.inputstream.#
-
Example: Ardrone;tcp://192.168.-
1.1:5555;60;640;360
Format description:
<
Name
>
;
<
url
>
;
<
Timeout
>
;
<
-
Width
>
;
<
Height
>
<
Name
>
: name of stream as it
will be seen in client.
<
Url
>
: URL of input network
stream
<
Timeout
>
: Parameter is
optional. Means time in seconds
while http stream will keep trying to
connect to stream after
disconnecting and stream name
will appear in list (same as timeout
for video devices).
<
Width
>
and
<
Height
>
: image
size. Parameters are optional, but
may be needed for some streams.
Local
∗
.avi file streaming from VLC is also available. You should use a custom MJPEG codec with parameters:
encapsulation – M-JPEG, video codec- MJPEG, 800Kb/s, frame rate – same as source. Specify new video source
in vstreamer.conf.
1.2.3
Video device settings
By default every video device found is available for streaming. You can change this behaviour by changing following
settings:
Parameter name
Default value
Description
vstreamer.videodevices.autodetect
1
Set audodetecting of video
devices. If set to “1” every
detected device will be available
for streaming except those which
are in device.exclude list (see
below). If set to “0” no devices will
be detected and available for
streaming except those which are
in device.allow list (see below).
Copyright © 2015, Smart Projects Holdings Ltd
