20
Appendix B: Telnet Commands
Command
Category
R/W
Default
Usage
Description
audioalign
Admin
RW
1800 secs
set audioalign [duration_secs]
show audioalign
Set Audio Antenna Alignment duration in
seconds
Duration 0 disables the beeping.
date Admin
RW
date
[-u]... [MMDDhhmmYYYY
Options:
-u Apply the UTC time zone offset to the
date
Display or set current date
default Admin
W
default
Restores system to factory defaults
ftpaddr Admin
RW
192.168.1.1
set
ftpaddr
[a.b.c.d] show
ftpaddr
Set remote ftp server IP address
ftppass Admin
RW p set
ftppass
[password] show
ftppass
Set remote ftp server password
ftpuser Admin
RW ftp set
ftpuser
[user] show
ftpuser
Set remote ftp server username
log
Admin
R
show log
Show Event Log
name Admin
RW
(blank)
set
name
[name] show name
Set system name
ntpaddr
Admin
RW
192.168.1.1
set ntpadd [a.b.c.d] show ntpaddr
Set NTP server address
password Admin
W admin
password
(prompts lead user for password change)
Change admin password
ping Admin
W
ping
[OPTION]... Host
Options:
-c CNT Send only CNT pings
-s SIZE Send SIZE data bytes in packets
(default=56)
-I iface/IP Use interface or IP address as source
-q Quiet, only displays output at start
and when finished
Test network connectivity
reboot Admin
W
reboot
Reboot system
savecfg Admin
W
savecfg
Save configuration to permanent memory
serialnum Admin
R
show
serialnum
Show system serial number
snmp
Admin
RW
enabled
public – for all
strings
192.168.1.1 for trap
manager
set snmp enable=[yes|no]
set snmp [read-community|rc]=[abcdef]
set snmp [write-community|wc]=[abcdef]
set snmp [trap-community|tc]=[abcdef]
set snmp [trap-manager|tm]=[a.b.c.d]
show snmp
Set SNMP configuration parameters
status Admin
R
status
Show system status
sysmode Admin
RW
PTP_SLAVE
show sysmode
set sysmode <PTP_MASTER | PTP_SLAVE>
Show / Set the PTP operating mode
