TANDBERG Video Portal
Data port Command Interface User Guide
or
SIP Interface Transport Default: <TCP/UDP/TLS>
---
sub-commands:
•
Mode
: Specifies whether the system uses a default SIP proxy.
•
Address:
Specifies the IPv4 address or FQDN of the SIP proxy.
•
Type:
Specifies the type of the SIP proxy.
•
Transport Default:
Determines which transport type will be used for SIP calls to and
from the traversal server.
Example of
SIP
feedback:
*c xConfiguration SIP Mode: On
*c xConfiguration SIP Interface Server Address: "127.0.0.1"
*c xConfiguration SIP Interface Server Type: Auto
*c xConfiguration SIP Interface Transport Default: UDP
SNMP
Configures the SNMP.
Note! For more information about SNMP please read the TANDBERG SNMP application note.
SNMP Mode < On/Off/ReadOnly/TrapsOnly >
or
SNMP CommunityName: <S: 0, 16>
or
SNMP SystemContact: <S: 0, 70>
or
SNMP SystemLocation: <S: 0, 70>
or
SNMP HostIPAddr [1..3]: <IPAddr>
---
parameters:
•
Mode:
< On/Off/ReadOnly/TrapsOnly >
•
Community Name:
Text string of maximum 16 characters.
•
System Contact:
Text string of maximum 70 characters
•
System Location:
Text string of maximum 70 characters
•
Host IP Addr:
The IP addresses of max 3 SNMP trap hosts
sub-commands:
•
Mode
enables or sets the mode of SNMP support
•
Community Name
is used to authenticate SNMP requests. SNMP requests must have
this ‘password’ in order to receive a response from the SNMP agent in the Video Portal.
•
System Contact,
Used to identify the system contact via SNMP tools such as
HPOpenView or TANDBERG Management Suite
•
System Location
Used to identify system location via SNMP tools such as
HPOpenView or TANDBERG Management Suite
•
Host IP Addr
identifies the IP-address of the SNMP manager. Up to three different
SNMP Trap Hosts can be defined. Your LAN administrator should provide the correct
values for these fields
Example of SNMP
feedback:
*c xConfiguration SNMP Mode: On
*c xConfiguration SNMP CommunityName: "public"
D1392602
17
