TASCAM HS-8 RS-232C Protocol Specification
PROJECT SELECT
Changes the current project to another project by specifying a project number.
Command
7F
Category Code
02
Sub Command
23
Machine ID
0
Data
8 bytes
Description
Remarks
Data 5
Data 6
Data 7
Data 8
0000
Specify the fixed value “0000” for PROJECT
SELECT.
Data 9
Tens digit of project number
Data 10
Ones digit of the project number
Data 11
Thousands digit of the project number
Data 12
Hundreds digit of the project number
Project number
Example) 5400: project 54
・
If a project number not existing in the media is specified, the connected device will transmit ILLEGAL [F2].
・
If the current project number is specified for the project number, the connected device will transmit
ILLEGAL [F2].
Return
none
FOLDER No. STATUS SENSE
Requests that the current folder number be returned.
Command
7F
Category Code
02
Sub Command
55
Machine ID
0
Data
none
Return
FOLDER No. RETURN [FF02D5]
FOLDER NAME SENSE
Requests that the name of specified folder be returned.
Data 9 to 12 (project number) can be omitted. If they are omitted, the name of the specified folder within the
current project will be called for.
Command
7F
Category Code
02
Sub Command
59
Machine ID
0
Data
4 bytes or 8 bytes
Description
Remarks
Data 5
Tens digit of the folder number
Data 6
Ones digit of the folder number
Data 7
Thousands digit of the folder number
Data 8
Hundreds digit of the folder number
Folder number
Example) 2301: folder 123
[If the data length is 8 bytes, the following data will be added.]
Description
Remarks
Data 9
Tens digit of the project number
Data 10
Ones digit of the project number
Data 11
Thousands digit of the project number
Data 12
Hundreds digit of the project number
Project number
Example) 5400: project 54
・
If a folder number not existing in the project is specified, the connected device will transmit ILLEGAL [F2].
Return
FOLDER NAME RETURN [FF02D9]
25
TEAC
Corporation
