WE310F5-I/P Porting Reference Guide
1VV0301733 Rev. 6
Page 20 of 40
2021-10-07
Features
GS2K
WE310F5
Hostless Software Architecture
Host less Architecture
Yes
Yes
Host less application
Source code for different
applications (S2W, TLS, TLS LP,
Video ADK) is available and can be
downloaded using SDK builder tool.
https://wifi.telit.com/secure/login
IDE : IAR workbench
Compiler : IAR
Debugger : IAR I-Jet Debugger
RTOS : Thread-X
Network Stack : NetX
Platform Layer : GEPS
Supported example applications:
TLS
TLS-LP
Source is available as part of AppZone
ADE ( Application development
Environment).
https://www.telit.com/developer-
zone/iot-app-zone/iot-app-zone-
developer-resources/
IDE : AppZone ADE based on Eclipse
Compiler : GCC
Debugger : Segger J-Link Debugger (
IDE Based )
RTOS : Free RTOS
Network Stack : LWIp
Platform Layer : M2MB
Supported example applications:
azure
gpio
hello_world
json_xml
ncm
ping
s2w
sntp
tcp_udp
uart
Serial Input/output
AT command Interface support
UART, SPI and SDIO
UART, SPI/SDIO/USB
Serial Interfaces Supported
Supports both single and dual
interfaces (one for commands and
another for data)
UART: Supports up to 921600 baud
Single interface (SPI (Byte-Stuffing
and Command-Response)
Supports Command-response
protocol up to 10MHz
Supports Byte stuffing protocol up
to 2MHz
SDIO:
Dual interface:
UART (cUART (data)
UART (cSPI (data)
UART (cSDIO (data)
Supports single interface only
Two UART:
UART0: S2W Application
–
921K
UART1 (AUX-UART): Programming
Mode - 1.5Mbps
Run Mode
–
115K
SPI: Up to 50MHz
SDIO: Up to 50MHz
USB: CDC class device
SPI1
Yes
Yes (SDIO with1 data line can be used.
Where I2C, 3 GPIO should be
compromised)
SDIO 4 data lines
Yes
Yes (I2C, I2S, SPI0 and 3 GPIO should
be compromised)
SPI
Header
8 Bytes
12 Bytes