8-5. Read digital input N channel counter value
Example:
Send command:”#012”…..Read the TRP-C28M channel 2 counter value.
Response:”!0100023”…..The digital input have been trigger 23 times.
*Unless you save value to EEPROM by using the command “#IDCS”. The counter’s value will
reset to 0 if power fail or send command “$IDRS”.
8-6. Clear digital input N channel counter value
Example:
Send command:”#01C2”, Clear DI2 counter value to 0.
Response:”!01”.
*If counter’s value already been reset to 0 you must use command “#IDCS” to save the new
value in EEPROM again, or the module will load old value if power fail or reset.
11
