3
Function Table
Function
Description
1. Copy
Copies data from source device to targets. (There are four copy
modes for selection at function "6.1 Copy Area")
2. Compare
Compares the source and targets to ensure copy accuracy.
3. Copy + Compare
Automatically launches compare function after copy is completed.
4. Erase
It is capable to
enable/ disable erase
of source HDD at
function 6.6.2
4.1 Quick Erase
Erases device(s)’ index table
.
4.2 Full Erase
Erases entire device(s), complying with NIST 800-88 Standards.
4.3 DoD Erase
Erases device(s), complying with DoD 5220.22-M Standards.
4.4 DoD EraseComp
Erases device(s), complying with DoD 5220.22-M Standards and
verifies complete erasure.
4.5 7-Pass Erase
Erases device(s) 7 times complying with DoD 5220.22-M(ECE)
Standards.
4.6 Secure Erase
Erases the non-loadable areas complying with NIST 800-88
Standards.
4.7 Enhanced Secure Erase
Erases devices that supports this feature.
5. Utility
5.1 Show Disk Info
Displays basic information including device model and capacity.
5.2 Update
System
5.2.1 Update BIOS
Updates system firmware by any device at the source
port.
5.2.2 Create Update HDD
Prepares by formatting the device to a 2GB FAT
partition to accept firmware file.
5.3 System Info.
Displays system information such as controller, model number,
software version, etc.
5.4 Get Checksum
This function will count CRC64 value at each port.
