5
Function Table
Function
Item & Description
1. Copy
Copies
source
device to connected target device(s). Refer
to function 6.1 Copy Area for 4 different copy modes.
2. Compare
Verifies target device(s) bit-by-bit to the master device.
3. Copy +Compare
Automated task of first duplicating and then verifies all the
data, bit-by-bit.
4. Erase
4.1 Quick Erase
Erases the index table only.
4.2 Full Erase
Erases the entire device capacity. Conforms to NIST 800-88
Standards.
4.3 DoD erase
3-Pass erase to the entire device capacity. Conforms to
DoD5220.22-M Standards.
4.4 DoD EraseComp
3-Pass erase to the entire device capacity and verifies.
Conforms to DoD5220.22-M Standards.
4.5 7-Pass Overwrite
7-Pass erase to the entire device capacity. Conforms to
DoD5220.22-M(ECE) Standards.
4.6 Secure Erase
Performs by sending ATA commands to the device(s)
requiring complete purging of data by its internal methods,
which conforms to NIST 800-88 standards. If you interrupt
the secure erase process, your device(s) will be unusable.
5. Utility
5.1 Show Disk info
Displays connected device(s) detail information.
5.2 Update
system
5.2.1 Update BIOS
Updates system firmware from source
port.
5.2.2 Create Update HDD
Formats HDD with a 2GB FAT partition for
the operator to save the new firmware in.
