Programming Manual MSO/UPO2000 Series
69 / 156
Instruments.uni-trend.com
:PF:STOP
:
THReshold
Command format
：
:PF:STOP
:
THReshold
<value>
:PF:STOP
:
THReshold?
Functional description
：
This command is used to set or query the stop threshold of Pass/fail test.
<value>: stop threshold, range is 1~30000, the specified range will self-adapting according to the
oscilloscope.
Return format
：
Query returns stop threshold, it is integer data.
For example
：
:PF:STOP
:
THReshold
100
Set the stop threshold of Pass/fail test to 100.
:PF:STOP
:
THReshold
?
Query returns 100.
:PF:TEMPlate
:
SOURce
Command format
：
:PF:TEMPlate
:
SOURce
{CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4 | REF | USB}
:PF:TEMPlate
:
SOURce?
Functional description
：
This command is used to set or query the template source of Pass/fail test.
Physical channel {CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4} can be template source.
If template source set to REF, it can use instruction :PF:TEMPlate:LOAD to load waveform file from REF
as the template source.
If template source set to USB, it can use instruction
to load waveform file from
U flash dish as the template source.
Return format
：
Query returns {CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4 | REF | USB}.
For example
：
:PF:TEMPlate
:
SOURce
CHANnel1
Set template source as channel 1
:PF:TEMPlate
:
SOURce
?
Query returns CHANnel1
:PF:TEMPlate:LOAD
Command format
：
:PF:TEMPlate:LOAD
<filename>
Functional description
：
This command is used to load the specified waveform file as the template source when the template
source is REF or USB.
For example
：
PF:TEMPlate:LOAD
"test.dat"
Load test.dat waveform file as the template source
:PF:TEMPlate
:X
Command format
：
