[42]
EXAMPLE 3:
<SOH>N1765155<STX>412-3433<ETX><EOT>
Will send the message “412-3433” at 1200 bps to a numeric pager with cap code 0765155. Note the lack of
commas and the implied leading zeroes on the cap code.
EXAMPLE 4:
<SOH>3,1,145678<EOT>
Will send a three beep tone message at 1200 bps to pager with cap code 0145678 with multiple tone/vibe
cadence capability. Certain paging receiver models may not be designed to respond to multiple tone/vibe
cadence messages.
EXAMPLE 5:
<SOH>2,1,145678<STX>412-3433<ETX><EOT>
Will send a two beep tone/vibe only message at 1200 bps to a paging receiver with cap code 0145678.
Note:
that the portion of the string after the cap code is ignored by the paging system because the paging
message type was a paging message type of one to four beeps.
EXAMPLE 6:
<SOH>450006123<EOT><CR><LF>
Will send a four beep tone only message at 512 bps to a paging receiver with cap code 0006123.
RESPONSE TO ALL COMMANDS
The SPS5 v9 Series Paging Systems will respond immediately to all commands, including Paging
Message commands, Setup Commands, and Status Commands, by echoing the Paging Message command
back to the PC, and appending the echoed command with a status message in one of the following formats:
<SOH><ACK>V…V,QQ,D,C,II<EOT>
The ACK response is sent to the host device following a command that was understood by the paging encoder.
