0x00:
The keys displayed on the central and peripheral device coincide, thus connection
setup can be continued
0x01:
The keys displayed on the central and peripheral device do not coincide, thus con-
nection setup shall the canceled
Response (
Start signal
Command | 0x40
Length
Status
CS
0x02
0x64
0x01 0x00
1 Byte
1 Byte
Status:
0x00:
Answer accepted
0xFF:
Operation not permitted
7.2.13. CMD_GETBONDS_REQ
This command requests the MAC addresses of all bonded devices.
Format:
Start signal
Command
Length
CS
0x02
0x0F
0x00 0x00
0x0D
Response (
Start signal
Command | 0x40
Length
Status
#Devices
Payload
CS
0x02
0x4F
2 Bytes
1 Byte
1 Byte
(Length - 2) Bytes
1 Byte
The Payload sequentially lists the data of the bonded
#Devices
devices. It consists of
#Devices
times the following telegram (see example below).
Bond_ID
BTMAC
2 Bytes
6 Bytes
Status:
0x00:
Request successfully processed
0x01:
Operation failed
0xFF:
Operation not permitted
If there are too many devices, the response of the
is split
into several
messages.
7.2.13.1. Example 1
Request for the bonding data of the devices in database.
Proteus-III reference manual version 1.3
© August 2020
www.we-online.com/wireless-connectivity
73