Arcom VIPER series Technical Manual Download

Page: 2 / 36

2192-12132-000-000

Contents

Contents ...................................................................................................................................... 2

Revision History ......................................................................................................................... 3

Preface......................................................................................................................................... 4

Definitions ................................................................................................................................. 4

Disclaimer ................................................................................................................................. 4

Anti-Static Handling................................................................................................................... 4

Packaging ................................................................................................................................. 4

Electromagnetic Compatibility (EMC) ....................................................................................... 4

Acknowledgements ................................................................................................................... 4

Technical Support ..................................................................................................................... 5

Introduction................................................................................................................................. 6

Features .................................................................................................................................... 7

VIPER-UPS (uninterruptible power supply)........................................................................... 7

VIPER-ICE (industrial compact enclosure)............................................................................ 8

VIPER-FPIF1 (flat panel interface) ........................................................................................ 8

Using the VIPER.......................................................................................................................... 9

Connecting a Host PC to the VIPER Console (COM1) ......................................................... 9

Using the CompactFlash™ Socket...................................................................................... 10

Using the Serial Interfaces (RS232) .................................................................................... 10

Using the Audio Features .................................................................................................... 10

Using the PC/104 Expansion Bus ....................................................................................... 11

Using the USB Ports............................................................................................................ 11

Using the Ethernet Interface................................................................................................ 11

Jumpers and Connectors ........................................................................................................ 12

LK1 – Reset......................................................................................................................... 13

LK2 – User Configurable Jumper 1 ..................................................................................... 13

LK3 – User Configuration Jumper 2 .................................................................................... 13

LK4, LK5, LK6 and LK7 – RS485/422 configuration ........................................................... 13

Connectors.............................................................................................................................. 14

Bootloader................................................................................................................................. 15

RedBoot .................................................................................................................................. 15

Detailed Hardware Description................................................................................................ 16

Processor ................................................................................................................................ 16

Memory ................................................................................................................................... 16

Synchronous DRAM Interface................................................................................................. 16

Bootloader EPROM................................................................................................................. 17

Flash Memory/Silicon Disk...................................................................................................... 17

Static RAM .............................................................................................................................. 17

Memory Map ........................................................................................................................... 17

Graphics Controller ................................................................................................................. 18

Backlight Enable.................................................................................................................. 20

LCD Vcc Enable .................................................................................................................. 20

Backlight Brightness Control ............................................................................................... 20

Interrupt Assignments ............................................................................................................. 20

Internal Interrupts ................................................................................................................ 20

External Interrupts ............................................................................................................... 20

PC104 Interrupts ................................................................................................................. 20

CompactFlash ......................................................................................................................... 21

Page 2

Summary of Contents for VIPER series





































Search results

Summary of Contents for VIPER series

Reviews:

Related manuals for VIPER series

Brands by name

Popular brands

Arcom VIPER series, Technical Manual

Search results

Summary of Contents for VIPER series

Reviews:

Related manuals for VIPER series

Brands by name

Popular brands