artisan PSH series, Programmer'S Manual

  PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY 

PROGRAMMER MANUAL 



  27  



<x>

 for PSS & PSH can only be 1. 

Returns: 

<NR 2> 

Examples : 

:CHANnel1:MEASure:VOLTage?

 might return 11.55 to indicate the 

voltage at the channel 1 output is 11.55 V.

:CHANnel<x>:PROTection:CURRent

Function: 

Set or query the overcurrent protection  status of the specific channel. 

Syntax: 

:CHANnel<x>:PROTection:CURRent <Boolean>  

:CHANnel<x>:PROTection:CURRent? 

<x> 

can be 1 or 2 or 3,

 <Boolean> 

can be 0 (OFF) or 1(ON). 

<x>

 for PSS & PSH can only be 1.  

Returns: 

0|1  

Examples : 

:CHANne1:PROTection:CURRent

 0 sets the over -current protection 

off.

If the overcurrent protection setting is on, the command 
of 

:CHANne1:PROTection:CURRent?

 will return the value of 1.

:CHANnel<x>:PROTection:VOLTage

Function: 

Set or query the over voltage protection value of the specific channel. 

  PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY 

PROGRAMMER MANUAL 



  28  



Syntax: 

:CHANnel<x>:PROTection:VOLTage < NR2> 

:CHANnel<x>:PROTection:VOLTage? 

<x> 

can be 1 or 2 or 3,

 <NR2> 

Please refer to the specification. 

<x>

 for PSS & PSH can only be 1.  

Returns: 

<NR2> 

Examples : 

:CHANnel1:PROTection: VOLTage 12.0 

sets the channel 1 

overvoltage  protection limit to 12.0 volts. 

:CHANnel1:PROTection: VOLTage?

 returns 2.34 if the channel 1 

overvoltage  protection limit setting is 2.34 volts.

:OUTPut:COUPle:TRACking

Function: 

Change the output of the channel 1 and channel 2 to series -tracking or 
parallel-track ing or independent output mode (The PSS and PSH series 
do not have this function). 

Syntax: 

:OUTPut:COUPle:TRACking <NR1> 

:OUTPut:COUPle:TRACking? 

<NR1>

 can be 0 (INDEPENDENT) or 1 (PARALLEL  -TRACKING) or 

2 (SER IES -TRACKING ). 

Returns: 

0|1|2  

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com