Revision 1.1
c.
Configure your server IP Address (or hostname) and port. This is the destination that
the AT110 will deliver data reports via TCP or UDP socket connections. The
commands are:
$IPAD,<ip_address_or_hostname>
$PORT,<port_number>
NOTE: IP address should be entered
WITHOUT LEADING ZEROS
d.
Select the required reporting protocol (i.e. packet format) using the following
command:
$PROT,<protocol>[<module-mask>]
<prot>
Reporting protocol
6
Fixed
protocol “K”
Legacy - not for new implementations
8
Fixed
protocol “M”
Legacy - not for new implementations
10
Fixed
protocol “P”
Carrier Transicold Refrigerator data
14
Fixed
protocol “V”
Legacy - not for new implementations
16
Modular protocol "X"
RECOMMENDED
for new implementations
17
Fixed packet protocol
“
S
”
Private client protocol
18
Modular Protocol
“
Z
”
Private client protocol
please contact Astra Telematics for advice and documentation on the above
protocols
e.
Select the required reporting MODE, UDP or TCP (either LOGIN based or with device
IMEI in every packet)
$MODE,<mode>
<mode>
Reporting MODE
0
RESERVED
1
RESERVED
2
RESERVED
3
RESERVED
4
TCP
–
IMEI IN EVERY PACKET
5
UDP
6
TCP - LOGIN MODE
f.
Your AT110 is now configured will all the basic essentials for operation. The text
output in TeraTerm will show details of any errors.
